Boat 4 Position Dual Battery Selector Switch 300Amp Disconnect 6007 M-Series

Description

Description:
Name: Battery Switch Switch
Type: 4-Position Selector
Color: Red
Position: 4
Battery Combine: Yes
Alternator Field Disconnect protects the alternator diodes in the event the switch is moved to the off position. off while the engine is running. If the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but off. : No
Maximum Voltage: 32V DC
Bolt Size: 3/8 in
Terminal Torque: 120 in-lbs (13.56 Nm)
30 second cranking rating normally associated with "cranking current" which is the current required by the cranking circuit prior to motor starting. The starting current varies significantly during the starting cycle. At first, a large current surge is required to overcome the inertia and compression of the motor. This increase can be two to four times the average starting current. Once the engine turns over there are peaks and angles as the pistons go through the compression and exhaust cycles.
Inrush current rating is used to measure batteries, cables, and battery switches.-900A
Inputs: 2
4/0 AWG Wire Leads: 1.12in (28.45mm)
Wire Size to meet ratings: 4/ 0AWG (120mm²)
Mounting Holes: #10 Screw Accepts
Pin Material: Tin Plated Copper
Bolt Torque: 120 in. lbs. (13.56 Nm)
Terminal Bolt Size: 3/8"-16 (M10)
Weight: 0.35 kg
Packing Included:
1 x Battery Switch
Note: All pictures and descriptions are for illustration purposes only, the color deviation is subject to the actual system configuration.